* Estimated delivery times start from the date of shipment, excluding processing time.
* Actual delivery times may vary due to holidays, weather conditions, or customs delays.
İade edilen ürünler, malın alındığı tarihten itibaren 40 gün içinde kabul edilecektir. Özel üretilen ürünler iade veya değiştirilemez. E-hediye kartı ile satın alınan ürünler yalnızca değiştirilebilir; iade edilemez.
Ücretsiz Hediye
Roymall'a hoş geldiniz, premium mağaza hediyeleri satın almak için profesyonel web siteniz. Desteğinizi takdir ediyoruz ve alışverişlerinize ekstra bir heyecan katmak için minnettarlığımızı göstermek istiyoruz. Bizden alışveriş yaparken, yalnızca yaşam tarzınızı geliştiren yüksek kaliteli ürünlerin keyfini çıkarmakla kalmayacak, aynı zamanda her siparişinizle birlikte özel bir ücretsiz hediye alacaksınız. Koleksiyonumuzu keşfetmeye ve mükemmel hediyelerinizi bulmaya hazır mısınız? Premium mağaza ürünlerimizin seçimine göz atın, sipariş verin ve alışverişinizle birlikte ücretsiz hediyenizin gelişini dört gözle bekleyin.
Nakliye Politikası
Siparişlerinizi aldıktan sonra ürünleri size teslim etmek için çok çalışacağız ve güvenle ulaşmalarını sağlayacağız. Teslimat detayları onay e-postanızda sağlanacaktır.Çoğu durumda, siparişler 2 gün içinde işlenir.Özel durumlarda, aşağıdaki gibi gecikmeler olabilir: Cumartesi, Pazar veya resmi tatillerde sipariş verirseniz, 2 gün gecikebilir.Normalde, uçuş gecikmeleri veya diğer çevresel faktörlerden etkilenmediği sürece 5-7 iş günü (Pazartesi'den Cuma'ya) gereklidir.Nakliye hizmetimiz dünya çapında olduğu için teslimat süresi konumunuza bağlı olacaktır, bu nedenle uzak bölgelerde veya ülkelerdeyseniz birkaç gün sürebilir.
1. İade & Değişim Politikası
Yalnızca roymall.com üzerinden satın alınan ürünleri kabul ediyoruz. Yerel distribütörlerimizden veya diğer perakendecilerden satın alırsanız, bunları bizden iade edemezsiniz.Final satış ürünleri veya ücretsiz hediyeler iade için kabul edilemez.İade için uygun olmak üzere, ürününüzün kullanılmamış ve aldığınız durumda olması gerekir. Ayrıca orijinal ambalajında olmalıdır.Bizden iade talimatlarını aldıktan sonra, lütfen iade ettiğiniz ürünleri paketleyin ve paketinizi yerel postaneye veya başka bir kuryeye bırakın.İade veya değişim ürününüzü aldıktan sonra 3-5 iş günü içinde işleyeceğiz. İade, orijinal ödeme yönteminize otomatik olarak yansıtılacaktır.Özel üretilen ürünler, özel boyut, özel renk veya özel baskı dahil olmak üzere iade veya değiştirilemez.Daha fazla yardıma ihtiyacınız varsa, lütfen bizimle iletişime geçin. service@roymall.com veya Whatsapp: +447549870296
2.İade Politikası
İade paketini aldıktan ve kontrol ettikten sonra tam iade veya %100 mağaza kredisi alacaksınız. İade, orijinal ödeme yönteminize otomatik olarak yansıtılacaktır.Lütfen nakliye ücretleri ve herhangi bir gümrük ücreti veya ücretinin iade edilemeyeceğini unutmayın. Ek nakliye ücretleri, paket gönderildikten sonra iade edilemez. Bu ücretleri ödemekten siz sorumlusunuz ve bunları feragat edemeyiz veya iade edemeyiz, sipariş bize iade edilse bile.İade süreciyle ilgili herhangi bir sorunuz varsa, lütfen bizimle iletişime geçin. service@roymall.com veya Whatsapp: +447549870296
Using manufacturer"s default configuration and the recommended FPV gear, it is 100% under 250 grams.
To the untrained eye, she will look like a harmless toy but, -we and you know- this is a super capable FPV ship that will even let you do long range like the bigger sisters. Being so light, it's a blessing for beginners since they will find that is really hard to break it. Also, coupled with NEW Kopilot Lite and the VC400 camera, you will get a ready to go FPV system, solder and hassle free.
Now you can enjoy more than 30 minutes FPV action (with a 18650 2S1P 3500mAh) or a super thrilling proximity mission (on 3S setup), everything under 250 grams. Since the wingspan is only 570mm, you don't even need to think about the portability, this thing is bicycle-ready!
Forget about those sketchy DIY projects, and spend your time flying a fantastic wing that will perform like a much bigger plane, without the worries of being pointed as a criminal.
Коробка немного примялась, но все приехало целое. Покрутил в руках - качество очень понравилось. Еще не летал, проверил на столе, сервы работают мотор крутится плавно и мягко. Обратил внимание, что теперь нет распорки (которая между магнитами, которые держат крышку), возможно это какое-то обновление и теперь распорка вклеена в фюзеляж, не знаю лучше это или хуже для жесткости, но сборка и доступ к комплектующим явно должна быть комфортней.
Впереди сборка и настройка :)
The box crumpled a little, but everything came whole. I twisted it in my hands - I liked the quality very much. I haven't flown yet, I checked it on the table, the servos are working, the motor spins smoothly and gently. I noticed that now there is no spacer (which is between the magnets that hold the lid), perhaps this is some kind of update and now the spacer is glued into the fuselage, I don’t know if it’s better or worse for rigidity, but assembly and access to components should clearly be more comfortable.
Assembly and configuration ahead :)
The box's a little tight, but it's all here. Twisted in his hands - the quality very much liked. Not yet flown, checked on the table, serves run the motor spinning smoothly and gently. I paid attention that now there is no spacer (which is between the magnets that hold the lid), perhaps it is some update and now the spacer is pasted into фюзеляж, I do not know better or worse for stiffness, but assembly and access to components clearly must be more comfortable.
Assembly and configuration ahead:)
The box crumpled a little, but everything came whole. I liked the quality very much. I haven't flown yet, I checked it on the table, the servos are working, the motor spins smoothly and gently. I noticed that now there is no spacer(which is between the magnets that hold the lid), perhaps this is some kind of update and now the spacer is glued into the fuselage, I don't know if it's better or worse for rigidity, but assembly and access to components should clearly be more comfortable.
Assembly and configuration ahead:)
The box's a little tight, but it's all here. Twisted in his hands - the quality very much liked. Not yet flown, checked on the table, serves run the motor spinning smoothly and gently. I paid attention that now there is no spacer (which is between the magnets that hold the lid), perhaps it is some update and now the spacer is pasted into фюзеляж, I do not know better or worse for stiffness, but assembly and access to components clearly must be more comfortable.
Assembly and configuration ahead:)
The box crumpled a little, but everything came whole. I liked the quality very much. I haven't flown yet, I checked it on the table, the servos are working, the motor spins smoothly and gently. I noticed that now there is no spacer(which is between the magnets that hold the lid), perhaps this is some kind of update and now the spacer is glued into the fuselage, I don't know if it's better or worse for rigidity, but assembly and access to components should clearly be more comfortable.
Assembly and configuration ahead:)
Tips:For questions about your order, place of delivery, product discount, taxation, delivery time, warranty, shipping, payment, exchange rate, and other questions unrelated to the product, please contact customer service.
showing 1-30 of 87|
Show Original
A part of the QA has been auto-translated.
0
Q:
what receiver do you buy for Taranis qx7 and does it have to be set up on bata flight and what battery 3S with a Xt 30 or Xt60 connector
what receiver do you buy for Taranis qx7 and does it have to be set up on bata flight and what battery 3S with a Xt 30 or Xt60 connector
Your information is incorrect "xiaohui" - please edit to correct it. The supplied connector (for the FPV version with the Kopilot flight control and GPS and the PNP version without Kopilot) is XT30 and the Kopilot only accepts PWM or S-bus receiver inputs.
Your information is incorrect "xiaohui" - please edit to correct it. The supplied connector (for the FPV version with the Kopilot flight control and GPS and the PNP version without Kopilot) is XT30 and the Kopilot only accepts PWM or S-bus receiver inputs.
Answered by bikinidan on 13/12/2020Helpful (0)
0
Q:
Novice to FPV. What is a good radio system to use with this?
Novice to FPV. What is a good radio system to use with this?
Fly sky i6 or i10 ought to do it for a first timer. you can get the shiny stuff once you're comfortable with the programming&flying basics, how to set up osd telemetry, etc.
Fly sky i6 or i10 ought to do it for a first timer. you can get the shiny stuff once you're comfortable with the programming&flying basics, how to set up osd telemetry, etc.
Why bother answering a question when you don’t even bother looking for the right answer it’s not an XT60🤔🤨🤥🙄🥴🤮🤐 thick as 🤡💩😲🤣 you probably cost people money buying wrong batteries keep 🤐🤫🤭
Why bother answering a question when you don’t even bother looking for the right answer it’s not an XT60🤔🤨🤥🙄🥴🤮🤐 thick as 🤡💩😲🤣 you probably cost people money buying wrong batteries keep 🤐🤫🤭
The recommended size is 2S-3S 900-1500mAh. A 4S 5000mAh will not only not fit, but the plane won't even be able to take off with that sort of weight. In other words, it will have the flight characteristics of a common house brick.
The recommended size is 2S-3S 900-1500mAh. A 4S 5000mAh will not only not fit, but the plane won't even be able to take off with that sort of weight. In other words, it will have the flight characteristics of a common house brick.
Answered by pfeerick on 16/10/2021Helpful (0)
0
Q:
How i need to turn my 2s prop? do the letters on the prop need to face motor or they need to be turned away?
How i need to turn my 2s prop? do the letters on the prop need to face motor or they need to be turned away?
Letters need to face the motor. And also spin motor and see the direction the leading edge of prop spins.it needs to scoop the air if it’s the wrong way you can just rearrange any 2 esc motor wires. 👍
Letters need to face the motor. And also spin motor and see the direction the leading edge of prop spins.it needs to scoop the air if it’s the wrong way you can just rearrange any 2 esc motor wires. 👍
Answered by sal.fav on 27/09/2020Helpful (0)
0
Q:
can you fly and land this from the water?
Is it an easy flyer
can you fly and land this from the water?
Is it an easy flyer
Look at the previous model I had and if it had protection for the engine it might have fallen into the water.
Look at the previous model I had and if it had protection for the engine it might have fallen into the water.
Answered by flavianass29 on 30/01/2025Helpful (0)
0
Q:
Receiver question.
Can I use an sbus receiver such as Frsky r-xsr or r9 mini to the flight controller or do I need a receiver with direct output to the servos? The link to the manual does not work so I can not check this myself.
Receiver question.
Can I use an sbus receiver such as Frsky r-xsr or r9 mini to the flight controller or do I need a receiver with direct output to the servos? The link to the manual does not work so I can not check this myself.
Order the FPV Version to get the ZOHD Kopilot Lite and VC400 All in one Camera included. You will have everything you need to fly FPV, but you must provide your own battery, rc receiver, and rc transmitter, as well as some kind of FPV goggles or monitor.
Order the FPV Version to get the ZOHD Kopilot Lite and VC400 All in one Camera included. You will have everything you need to fly FPV, but you must provide your own battery, rc receiver, and rc transmitter, as well as some kind of FPV goggles or monitor.
No, only the FPV version includes the AIO video camera and Kopilot (which comes with the GPS unit included.) The PNP does not include any Flight Control.
No, only the FPV version includes the AIO video camera and Kopilot (which comes with the GPS unit included.) The PNP does not include any Flight Control.
Answered by bikinidan on 17/07/2020Helpful (0)
0
Q:
on the fuselage, the plate with the magnets should be solid, for attaching the cover, but now the kit version is coming and this plate is not there; Do all versions have one or only kit?
on the fuselage, the plate with the magnets should be solid, for attaching the cover, but now the kit version is coming and this plate is not there; Do all versions have one or only kit?
What is the likely success using a multiprotocol Tx with an Express LRS module & Rx? Please don't answer unless you have personal experience with this equipment. Any gotchas there?
What is the likely success using a multiprotocol Tx with an Express LRS module & Rx? Please don't answer unless you have personal experience with this equipment. Any gotchas there?
ready to fly
Hi to everyone. I am totally new, but can't find a single rc plane here to buy that has everything already set up. I DO NOT know how to buy separate parts and then connect them together (I do not even know what a receiver looks like). If I buy the FPV version, then I presume I must still buy a radio and a battery. Is this all?
But does anyone have a link at Banggood to show me which long range radio (5 to 10 km or further I can buy here )and which long distance battery I can buy that is compatible with this rc plane pleasejQuery111305003051300827018_1625402870504? But will the FPV camera pick up at such a long distance?
Finally, may I ask is it easy to connect the radio with the plane or too complex?
I don’t want to spend a fortune, and then I can’t connect them together?
Thank you to everyone for your help (I just wish these manufacturers can sell them ready to fly).
ready to fly
Hi to everyone. I am totally new, but can't find a single rc plane here to buy that has everything already set up. I DO NOT know how to buy separate parts and then connect them together (I do not even know what a receiver looks like). If I buy the FPV version, then I presume I must still buy a radio and a battery. Is this all?
But does anyone have a link at Banggood to show me which long range radio (5 to 10 km or further I can buy here )and which long distance battery I can buy that is compatible with this rc plane pleasejQuery111305003051300827018_1625402870504? But will the FPV camera pick up at such a long distance?
Finally, may I ask is it easy to connect the radio with the plane or too complex?
I don’t want to spend a fortune, and then I can’t connect them together?
Thank you to everyone for your help (I just wish these manufacturers can sell them ready to fly).
Good evening, I advise you to research well about model airplanes and in the case of beginning, it is always good to have a high wing aero trainer, although this wing model already has a stabilization controller that helps you fly when you don't have much practice, this model comes with all electronics needed to fly, but you need transmitter and receiver and a battery. A good model with a range of 2 km and a 6-channel Flysky.
Good evening, I advise you to research well about model airplanes and in the case of beginning, it is always good to have a high wing aero trainer, although this wing model already has a stabilization controller that helps you fly when you don't have much practice, this model comes with all electronics needed to fly, but you need transmitter and receiver and a battery. A good model with a range of 2 km and a 6-channel Flysky.
Answered by flavianass29 on 30/01/2025Helpful (0)
0
Q:
Will it hold the gopro? or should I buy XL version?
Will it hold the gopro? or should I buy XL version?
no.If you own a soldering iron, it will not be difficult for you!
no.If you own a soldering iron, it will not be difficult for you!
Answered by ILYA_W on 17/02/2022Helpful (0)
0
Q:
I bought the emax tiny hawk controller and goggles and was flying and the tiny hawk flew away I bought a new quadcopter without goggles and controller same tinyhawk and cant get it to fly or sync with controller to even come alive how do I get it to work I'm a novice but can figure it out if you tell me how to do it
I bought the emax tiny hawk controller and goggles and was flying and the tiny hawk flew away I bought a new quadcopter without goggles and controller same tinyhawk and cant get it to fly or sync with controller to even come alive how do I get it to work I'm a novice but can figure it out if you tell me how to do it
Fatshark some still say. But be aware you need a relatively slim nose root to fit them. Superior analog googles today are Skyzone 03O, Eachine EV300O and the very expensive Orqa.One. For an analog start the Eachine EV800D aren't bad (bigger screen than EV800DM, but no focal adjustment). Depending on your budget the DJI digital FPV system may also be an option.
Fatshark some still say. But be aware you need a relatively slim nose root to fit them. Superior analog googles today are Skyzone 03O, Eachine EV300O and the very expensive Orqa.One. For an analog start the Eachine EV800D aren't bad (bigger screen than EV800DM, but no focal adjustment). Depending on your budget the DJI digital FPV system may also be an option.
Technically that's possible. But you will probably have to use two micro servos (or a mechanical link) to activate control surfaces on both fins. I had the same idea, but I'm afraid due to the short lever between the rudders and the CG they might not be very effective.
Technically that's possible. But you will probably have to use two micro servos (or a mechanical link) to activate control surfaces on both fins. I had the same idea, but I'm afraid due to the short lever between the rudders and the CG they might not be very effective.
Answered by Martin on 17/08/2020Helpful (0)
Ask a Question
1.You can contact the customer service. for any question regarding the product.
2.Ask the question in English to get answer faster.